New Arrival China Dry heat tunnel validation by ECV - Compact Modular Dry Heat Incubator – Bioendo
New Arrival China Dry heat tunnel validation by ECV - Compact Modular Dry Heat Incubator – Bioendo Detail:
Dry Heat Incubator
1. Product description:
Dry Heat Incubator TAL-M2 is amicroprocessor-controlled device, high precision of temperature control, samplepreparation parallelism, as an alternative to the traditional water bathdevice. It is recommended to use in the gel clot TAL endotoxin assay. And it can be widely used in various other application includes the pharmaceutical, chemical, food safety, environment, quality inspection. TAL-M2 includes 2 heating modules. TAL- M2 A Dry bath incubator Can achieve two independent heating modules, thermostats, unique combo designed to meet the needs of more experimental.
2. Product features
1, LCD display, simple interface.
2, high heating speed, uniformheating, accurate temperature control, high stability, low energy consumptionand no noise.
3, Built in temperature calibrationfunction, automatic fault detection and buzzer alarm function.
4, Built in over-temperatureprotection device, safe and reliable use, prolong the service life of themachine.
5, product design, compact and tight,small occupied space, freer and easier.
6, Various blocks for convenientreplacement, cleaning and disinfection.
7，It Can achieve two independentheating modules, thermostats, unique combo designed to meet the needs of moreexperimental.
dry bath double control, dry incubator doublemodule, limulus polyphemus blue blood, tal kinetic chromogenic method, talendotoxin kit
| Product Name & Descriptions |
TAL-M2 Dry heat incubator (single heating module); One modular total 60 holes for mass test in pharmaceuticals application. |
|
| Temperature control Range | Ambient+5℃ ~ 150℃ | |
| Temperature setting range | Ambient+5℃ ~ 150℃ | |
| Temperature rising time | ≤ 30min (from 20℃ rise to 150℃), rise to 37deg C in about 60s. | |
| Temperature Stability @100~150℃ | ≤±1℃ | |
| Temperature Stability @40~100℃ | ≤±0.5℃ | |
| Temperature Uniformity @40℃ | ±0.3℃ | |
| Modular temperature uniformity | ±0.5℃ | |
| Displayed Temperature Precision | 0.1℃ | |
| Temperature Control time | 99h59min | |
| Fuse protector | 250v, 3A/6A, Φ5×20 | |
| Highest Temperature | 150℃ | |
| Power supply | AC220V/AC110V, 50/60Hz, 400W | |
| Dimension | D260*W220*H95mm | |
Product detail pictures:
Related Product Guide:
The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for New Arrival China Dry heat tunnel validation by ECV - Compact Modular Dry Heat Incubator – Bioendo , The product will supply to all over the world, such as: France, Turin, America, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers' satisfaction and achieve win-win situation .
By Katherine from Albania - 2017.11.11 11:41
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Diana from Benin - 2018.09.12 17:18
Leave Your Messages
Related products
-
Factory wholesale TAL Reagent Water - Nymph X ...
NYMPHX Nymph X Water Purification System Nymph X Water Purification System could transfer tap water into pure water and ultrapure water. Equipped with a pressure stabilizer and low flow-rate operating mode, the system can adapt to various source conditions without any extra pre-treatment necessary. The system also supports multiple water dispensing modes, and the precision of quantitative and quality-controlled dispense of water could reach ±1%. Meanwhile, comprehensive monitoring could be...
-
Low price for Pipettor tip box - Mini Dry Heat...
Dry heat incubator single module 1. Product information The Mini Dry Heat Incubator is a micro-processor controlled heating block with semi conductor heating technology.It adapts onboard use, smart, light and convenient for movement, suit for any kind of occasions. Especially good for the incubation of the gel clot LAL assay, LAL chromogenic endpoint assay incubation. 2. Product features 1. Unique designed. Smart and light, convenient movement, suit for various occasions. 2. LCD simultaneou...
-
China Cheap price Chromogenic endotoxin assay -...
End-point Chromogenic Endotoxin Test Kit (without Diazo Coupling) 1. Product Information End-point Chromogenic Endotoxin Test Kit (without Diazo Coupling) is conducted by adding a colorless artificial peptide substrate solution into mixture of Lyophilized Amebocyte Lysate and test sample after a certain incubation period. If test sample contain endotoxin, a yellow color will develop in the 96 well microplate. Its absorbance (λmax = 405nm) is related to the endotoxin concentration. Endotoxin ...
-
China Factory for Endotoxin Analysis Methods -...
Endotoxin Challenge Vials (Endotoxin Indicator) 1. Product Information The Endotoxin Challenge Vial (ECV，Endotoxin Indicator) is used in the validation of dry heat depyrogenation cycles. Endotoxin Challenge Vials are placed in the cold spots of the dry heat oven. After cycle completion, the log reduction in endotoxin levels can be determined by comparing the endotoxin levels in the baked vs not baked Endotoxin Indicators. The Endotoxin Challenge vials are designed to indicate a minimum 3...
-
New Fashion Design for Bacterial Endotoxin Test...
Pyrogen-free Microplates, 96 Well Plate Strips and pyrogen free Reagent Reservoir 1. Product information These pyrogen-free 96-well plates (endotoxin-free microplates, pyrogen-free reservoir, cell culture plate, endotoxin-free plates) is used in the End-point Chromogenic Lyophilized Amebocyte Lysate Assay, Kinetic Chromogenic Lyophilized Amebocyte Lysate Assay and Kinetic Turbidimetric endotoxin test assay. The microplates and resevoirs contain endotoxins <0.005 EU/ml endotoxin. Catalog...
-
Rapid Delivery for Endotoxin Producing Bacteria...
Endotoxin-free Glass Test Tubes 1. Product Information Endotoxin-free glass test tubes contain less than 0.005EU/ml endotoxin. Catalog number T107505 and T107540 are recommended for use as reaction tubes in gel clot and end-point chromogenic assays. Catalog number T1310018 and T1310005 is recommended for dilution of endotoxin standards and test samples. T1050005C is a special designed short endotoxin reaction tube that allows the pipette tips reaches the tube bottom. T087565 is used ...
